How to Access the Web UI (IP5M-1190W)

Before accessing the camera's web UI the camera must be connected to the network first using the SoftAP process. For more information on how to connect the camera to your network using SoftAP, click here.

After the camera has been successfully connected to your network the web UI can now be accessed. This camera features the latest in Javascript technology which allows you to access your camera using a wide variety of web browsers including, Google Chrome, Firefox, Safari, or other mainstream web browsers using your PC or Mac. Please note, for an optimal experience with a web browser, it is highly recommended to use the Internet Explorer or IE Mode using Microsoft Edge as some features may still require the use of a plugin.
If using IE Mode or Internet Explorer, please make sure to allow all plugins as they will be necessary to view all the features. For more information on how to access your camera from your computer please refer to the information below.
To access your camera from your computer you will need to first locate the camera’s IP address. To locate the camera’s IP address is it highly recommended to download our free Amcrest IP Config Tool software. The Amcrest IP Config Tool can be downloaded at the following web page: amcerest.com/downloads

In the All Downloads menu, click on IP Config Software to begin the free download. Once the download has completed installing, locate the IP address associated with the device you would like to view in the browser. Open the web browser and enter this IP address into the browser. Press Enter to access the web user interface. Enter the username and password for your camera and click Login to access the web UI. 

Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.