Below is a list of Hanwha Techwin cameras supported with the plug and play solution. If your camera is not in this list note that most Hanwha Techwin will work with port forwarding.
**Important** - If adding the Plug & Play cameras with the web methodology, make sure you have the latest SDK file for your camera series. Please contact support if you are unsure.
| 4.01 wn5 | 4.02_cv2 | 4.02_cv2x | 4.02_s3l |
| QNP-6320R | QNF-9010 | PNB-A6001 | QND-6011/6021 |
| XNO-6320RHP | PND-A6081RF/A6081RV,PNO-A6081R, PNV-A6081R | QND-6012R/6022R/6032R | |
| TNO-7180R | QND-6072R | ||
| QND-6082R | |||
| QND-8010R/8020R/8030R/8080R | |||
| QND-8011/8021 | |||
| QNE-8011R/8021R | |||
| QNO-6012R/6022R/6032R | |||
| QNO-6072R | |||
| QNO-6082R | |||
| QNO-8010R/8020R/8030R/8080R | |||
| QNV-6012R/6022R/6032R | |||
| QNV-6072R | |||
| QNV-6082R | |||
| QNV-8010R/8020R/8030R/8080R | |||
| 4.02_wn5 | 4.02_wn7 | 4.02_wn7_XNF9010rv |
| QNF-8010 | TNF-9010 | XNF-9010RV |
| QNP-6230/6230H | XNB-6002 | |
| QNP-6230RH | XNB-8002 | |
| QNP-6320H | XNB-9002 | |
| XNB-6000 | XND-8082RV/RF | |
| XNB-6001 | XND-8083RV, XNV-8093RV | |
| XNB-6005 | XND-9082RV/RF | |
| XNB-8000 | XNF-9013RV | |
| XND-6010 | XNO-6083R | |
| XND-6011F | XNO-6123R | |
| XND-6020R | XNO-8082R | |
| XND-6080/6080V | XNO-8083R | |
| XND-6080R/6080RV | XNO-9082R | |
| XND-6081REV/8081REV | XNP-6400RW | |
| XND-6081RV/6081RF/6081V/6081F | XNP-8300RW | |
| XND-6081VZ/6081FZ | XNP-9250 | |
| XND-6085/6085V | XNP-9250R | |
| XND-8020F | XNP-9300RW | |
| XND-8020R/8030R/8040R | XNV-6083RZ | |
| XND-8080R | XNV-6123R | |
| XND-8080RV | XNV-8082R | |
| XND-8081FZ/8081VZ | XNV-8083R | |
| XND-8081RF/8081RV | XNV-8093R | |
| XND-L6020R | XNV-8083RZ | |
| XND-L6080R/L6080V/L6080RV | XNV-9082R | |
| XNF-8010R/8010RV/8010RVM | XNV-9083RZ | |
| XNO-6010R/6020R/6080RS | XNV-C9083R | |
| XNO-6080R | XNF-9010RV | |
| XNO-6085 | ||
| XNO-6085R | ||
| XNO-6085RA | ||
| XNO-6120R | ||
| XNO-6120R | ||
| XNO-8020R/8030R/8040R | ||
| XNO-8080R | ||
| XNO-L6020R | ||
| XNO-L6080R | ||
| XNO-L6080RA/KME | ||
| XNO-L6085R | ||
| XNO-L6120R | ||
| XNP-6040H | ||
| XNP-6120H | ||
| XNP-6250RH | ||
| XNP-6320/6320H/6320HS | ||
| XNP-6320HS | ||
| XNP-6320RH | ||
| XNP-6321/6321H | ||
| XNP-6371RH | ||
| XNP-6550RH | ||
| XNV-6010 | ||
| XNV-6011 | ||
| XNV-6012/6012M | ||
| XNV-6013M | ||
| XNV-6020R | ||
| XNV-6022R/6022RM | ||
| XNV-6080/6080R | ||
| XNV-6080RS | ||
| XNV-6080RSA | ||
| XNV-6081/6081R | ||
| XNV-6081RE/8081RE | ||
| XNV-6081Z | ||
| XNV-6085 | ||
| XNV-6120 | ||
| XNV-6120R/6120RS | ||
| XNV-8020R/8030R/8040R | ||
| XNV-8080R/8080RS | ||
| XNV-8080RS | ||
| XNV-8080RSA | ||
| XNV-8081R | ||
| XNV-8081Z | ||
| XNV-L6080/L6080R | ||
| XNZ-L6320 |
SDK Install failed
It's possible the firmware update for your model has changed the SDK version, you can confirm which version your open platform is currently running and download the correct file from the table below:
| Open Platform Version | Cap File |
| 5.00_230407 | v4_02_wn7_1_6_1.cap |
| 4.01_210517 | v4_01_wn5_1_6_0.cap |
| 4.02_220126, 3.52(FW 1.4x) | v4_02_wn5_1_6_1.cap |
| 3.6 | |
| 4.01_210514 | v4_01_cv2x_1_6_0.cap |
Wisenet Q Series (port forwarding required)
QND-7010R
QND-7020R
QND-7030R
QNO-7010R
QNO-7020R
QNO-7030R
QNV-7010R
QNV-7020R
QNV-7030R
QND-7080R
QNO-7080R
QNV-7080R
Note: We recommend using the port forwarding solution instead of using plug and play (turn off Open SDK when adding a camera).
Wisenet III (Discontinued)
SNB-6004
SNB-6003
SND-6084
SND-6083
SND-6084R
SNV-6084R
SNO-6084R
SNB-6010
SNV-6013
SNB-5004
SNB-5003
SND-5084
SND-5083
SNV-5084
SNZ-6320
IMPORTANT: Only X-series only cameras support Edge Storage solution with plug and play.
Comments
Please sign in to leave a comment.