After the camera has been successfully connected to your network it can be physically installed. Use the included Velcro sticker templates to attach the device to any glass surface including windows or other similar surfaces.
The installation surface should also support more than 3x the weight of the camera. If you use a microSD card to store your recordings, please make sure it does not exceed 128GB and is inserted in the camera before installing it onto the mounting surface.
Step 1: Thoroughly clean the glass surface before installation.
Step 2: Remove the protective film from the sticker. Apply the sticker to the glass surface and ensure a smooth, bubble-free application by pressing down firmly.
Step 3: Place the front of the camera onto the Velcro sticker and firmly press to secure it.
Step 4: Use the included cable clips to neatly run the power cable to the power outlet.
Step 5: Gently press on the camera and clips to make sure they are securely attached.
Step 6: The device is now installed and ready for use in the Amcrest Link mobile app.
Comments
Please sign in to leave a comment.