After the camera has been successfully connected to your network and added to your Amcrest Smart Home account you can begin physically installing the camera. While installing the camera, please make sure the installation surface is strong enough to support 3x the weight of the camera and the bracket. For more information on how to physically install your camera, please refer to the information provided below.
Ceiling Mount
Step 1: Peel off the U-shaped mounting template and stick it onto the desired installation area.
Step 2: Drill holes into the mounting surface as per the mounting template marks and insert the included wall anchors.
Step 3: Secure the mounting bracket to the installation surface using the included mounting screws.
Step 4: Align the 
on top of the camera with the 
on the bracket, then fit the two parts together.
Step 5: Rotate the camera counterclockwise until it is locked into place. Make sure the icon aligns with the 
icon.
Step 6: Apply power to the camera and allow it to initialize. After initialization is complete, adjust the angle of the camera accordingly.
Wall Mount
Step 1: Peel off the U-shaped mounting template and stick it onto the desired installation area.
Step 2: Drill holes into the mounting surface as per the mounting template marks and insert the included wall anchors.
Step 3: Secure the mounting bracket to the installation surface using the included mounting screws.
Step 4: Align the on top of the camera with the on the bracket, then fit the two parts together.
Step 5: Rotate the camera counterclockwise until it is locked into place. Make sure the icon aligns with the icon.
Step 6: Apply power to the camera and allow it to initialize. After initialization is complete, adjust the angle of the camera accordingly.
Comments
Please sign in to leave a comment.