How To Setup a Camera In Blue Iris with RTSP Support (ASH21-V3)

The camera must be set up first using the Amcrest Smart Home app before adding it to any additional software. For more information on how to add your specific device using the Amcrest Smart Home app, please refer to the Quick Start Guide for your specific device.

Step 1: Open the Blue Iris Software. Right-click on the main interface to display the New camera interface.

mceclip0.png

Step 2: Enter a Full name and Short name for the camera. Make sure to also click on the "Enable audio" checkbox to enable audio. Click OK.  

Image1.JPG

Step 3: Use the Amcrest IP Config tool to locate the IP address for your doorbell from the network. To download the Amcrest IP Config tool, click here

image2.JPG

Step 4: Enter the IP address of the camera in the Address field. Enter the username and password for the camera into the User and Password fields.

image4.JPG

Step 5: Click on the Make drop-down menu and select Amcrest

image13.png

Step 6: In the Model, dropdown menu select AD110, ASH21, ASH26,...RTSP. 

image2.PNG

Step 7: In the Params field, enter the following RTSP information: channel=1&subtype=0&authbasic=64

image11.PNG

Step 6: Click Skip initial HTTP and reachability tests.

image12.PNG

Step 7: Click OK.

mceclip0.png

The camera has now been added and visible in Blue Iris software.

image7.JPG

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.