How to Set a Static IP Using Amcrest View Pro

How to Set a Static IP Using Amcrest View Pro

Having a static IP address setup for your device will ensure a more stable connection as well as provide a more efficient means of accessing your device remotely. A static IP is useful as well if the device goes offline or loses power. When a static IP is set the device's IP address will remain the same. 

For more information on how to set a static IP address using the Amcrest View Pro app, please refer to the information below. 

Step 1: Open the Amcrest View Pro app on your mobile device.

Screenshot_20190903-124043.png

Step 2: Tap on the main menu ( mceclip0.png ) located in the upper left hand corner and tap on Configuration Center

Screenshot_20190903-124112.png

Step 3: From the Configuration Center menu, tap on IP Settings

Screenshot_20190903-124118.png

Step 4: Select your device from the IP Settings menu

Screenshot_20190903-124257.png

Step 5: Tap on the Mode option to display the dropdown menu. tap on Static to set the device to a static IP address. 

Screenshot_20190903-124303.png

 

Step 6: The IP setting will be saved once a selection has been made. Tap on the back arrow (mceclip1.png) to exit the IP Settings menu. 

Screenshot_20190903-124303.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.