Having Troubles Reading the Hard Drive? 

 

Having Troubles Reading the Hard Drive? 

If your device is having difficulty reading your newly installed hard drive the hard drive and all connections are properly made, you may need to be manually formatted. Most Amcrest NVRs and DVRs require the hard drive to be formatted to FAT32 which is standard for most devices. To format the hard drive, remove it from the NVR and hook it up to your computer. Once the hard drive is installed and is being properly read by the computer, download and install the GUI Formatting Tool provided below.

GUI Format Tool.exe

(80 KB)
Note: The GUI Format Tool is for Windows users only. Mac users can also format a hard drive to FAT32 using Apple's disk utility which comes standard on MacOS. For more information on using Apple's disk utility click here
Formatting using the GUI Format Tool
Once installed, locate the hard drive you just installed on your computer. 

image31231.PNG

Note: Uncheck the Quick Format checkbox if you would like a full format of the hard drive. Formatting the hard drive will remove all information and data from the drive and format the drive to FAT32. 

Step 3: Click Start in the FAT32 Format menu and allow the program to format the hard drive. Click OK to continue. 

image9312.PNG

 Step 4: Allow the program to finish formatting the hard drive. When finished, click the Close button to close the program. 

image890321.PNG

The hard drive has now been properly formatted to FAT32. Remove the hard drive from the computer and insert it into your device. When properly installed, the device should be able to locate and use the hard drive, 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.