How To Setup A Fast Moving Rule On An Amcrest Camera (IP4M-1066EW)

Fast-Moving allows the camera to trigger an event if an object, such as a human or vehicle, quickly moves in an area set by the user. After adding the rule, the interface will display the rule as enabled, use your mouse to draw a detection area on the interface. For more information on how to setup the rule please refer to the information provided below.

Step 1: Open a web user interface (Web UI) of your device and log in. For more information on how to access the web UI, click here.

.Step 2: Access the AI menu and click Please add a preset first. 

Step 3: Click Add Preset and set a preset for the rule if needed using the provided PTZ options. Double click the Name field and enter a name for the preset. Click Apply, then click OK. 

Step 4: Click +Preset and add the preset to the interface. Select the preset and click Next.

Step 5: Select the preset, click Add Rule, and select Fast Moving. Adjust the sensitivity if needed and draw a detection area in the area you would like to monitor and select any other applicable options. Click Apply.