Accessing the Web User Interface (Thermal Monitoring Solution)

Accessing the Web User Interface

The thermal monitoring system is equipped with the latest in JS technology which allows you to access the device via a wide variety of web browsers including, Google Chrome, Firefox, Safari and other mainstream web browser via your PC or Mac computer. For more information on how to access your camera from your computer please refer to the information below.

Note: The thermal NVR and camera must be connected to the same network segment as your computer to initially access the web user interface. 

To access your system from your computer you will need to first locate the system's  IP address. To locate the system's IP address is it highly recommended to download our free  Amcrest IP Config Tool software. The Amcrest IP Config Tool can be downloaded at the following web page:

In the All Downloads menu, click on IP Config Software to begin the free download. Once the download has completed installing, locate the IP address associated with your system.


Open a web browser and enter this IP address into browser. Press enter to access the web user interface.


In the web user interface, enter the login credentials for your device. If this is the first time accessing the device, the username and password will both be admin. Click on Login.


If this is the first-time logging into your device, you will be prompted to modify the password for your device. To modify the password, enter the new password you would like to use in the New Password field and confirm. The password used should be between 8 and 32 characters long with a combination of letters and numbers

Click OK when and allow the interface to load.



Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request



Please sign in to leave a comment.