Pinhole Camera Physical Installation (IP2M-PH822B-CAM)

Pinhole Camera Physical Installation (IP2M-PH822B-CAM)

To install the camera on a ceiling or wall, please reference the below diagram as well as the steps:   

Prior to installation, please ensure that the installation environment can support at least 3x the weight of the camera and the bracket.  THIS IS NOT A WIFI OR PoE DEVICE. An Ethernet cable and included power adapter will be needed to setup your camera.


To install the camera onto a wall, follow the steps below: 

  1. Place the mounting bracket onto the surface you wish to mount your camera.
  2. Use the self-tapping screws to secure the bracket to the mounting surface.
  3. Loosen the adjusting screws to adjust the angle of your device. The device can be adjusted in a up or down position.
  4. Tighten the adjusting screws to secure the angle of the camera.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request



Please sign in to leave a comment.