Performing a factory reset on your camera will revert the camera back to its original factory default settings. This can be done physically at the camera or via the web user interface (web UI) through a web browser on a computer.
To perform a physical factory reset to this camera, make sure the device is powered on and follow the instructions provided below.
Step 1: Make sure the camera is powered on and using a Phillips head screwdriver, remove the panel on the bottom of the camera
Step 2: In the panel you will notice a microSD card slot and a reset switch. To hard factory reset your camera, press and hold the switch down for 30 seconds allowing the camera to reset.
Once reset, the camera will revert to its original factory settings. The default username and password for the camera will be admin.
Comments
Please sign in to leave a comment.