The camera will include an installation plate that will be used to secure the camera to the mounting surface. Before installing your camera, please make sure the mounting surface can support at least 3x the weight of the camera.
MicroSD Card Installation
The camera can support a microSD card for up to 256GB. Remove the microSD card plate from the camera and locate the microSD card slot. Insert the microSD card into the slot ensuring it is secured inside the camera. Place the plate back onto the camera and secure it back to the camera.
Installing the Camera
Please make sure the mounting surface can support 3x the weight of the camera before installing. A Phillips head screwdriver and drill may be required during installation.
| 1. Place the installation sticker onto the mounting surface. Use a drill to drill the install holes and insert the included wall anchors. A 1" paddle bit can be used if running wire to the camera. | 2. Connect any wiring, and run it through the installation surface. Do not cut any wiring while installing. |
| 3. Align the bracket of the camera to the wall anchors and insert the installation screws. Use a Phillips head screwdriver to secure the camera to the mounting surface. | 4. Use the included torx wrench on the mounting bracket to adjust the camera according to the desired position. |
Comments
Please sign in to leave a comment.