How To Setup Camera Mapping

Camera mapping is a feature in the Amcrest View Pro app that allows you to set markers on an image that relate to the positioning or location of a device on a topical map. For more information on how to set up camera mapping. Please refer to the information provided below.

Note: The topical map must be added by the user and must be a representation of the area in which the cameras are located and being mapped. 

Step 1: Add a topical image of the area in which the cameras are placed. Ensure the image is placed in the Photo/Gallery section on your mobile device.

Step 2: Open the Amcrest View Pro app and tap on the main menu icon ( mceclip0.png ). 

Screenshot_20200605-161333.png

Step 3: Tap on Camera Map.

Screenshot_20200605-161508.png

Step 4: Tap on the "+" icon. 

Screenshot_20200605-161544.png

Step 5: Select topical image map you would like to use from your photos/gallery and import it into the camera mapping interface. 

Screenshot_20200605-161640.png    Screenshot_20200605-161837.png

Step 6: Tap on the pinpoint icon ( mceclip1.png )  to being placing markers of your devices on the map. To place a marker on the map select your device from the device list. Tap and hold the pinpoint and use your finger to drag the pinpoint to a specific location of your device on the map. 

Screenshot_20200605-162044.png

Note: This can be repeated multiple times if multiple devices are in the area. 

Step 7: Tap on the save ( mceclip2.png ) icon and input a name for the location. Tap OK to complete the process.

Screenshot_20200605-162411.png

To view the camera feed, tap on the pinpoint set on the map to load the camera that is marked in the specified area. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.