How To Perform a Factory Reset (ASH26)

 

How To Perform a Factory Reset (ASH26)

Performing a factory reset will reset the device back to its original factory settings, this includes login credentials for the camera. The default username and password for the device is admin

For more information on how to factory reset the camera, please refer to the information provided below. Please note, the camera must be powered on while the device is being reset. The reset can be found on the top of the camera, next to the microSD card slot. 

image1.PNG

Step 1:  Remove the lid on top of the camera portion of the device and locate the reset button. 

20201020_121012.jpg

Step 2: Press and hold the reset button for roughly 5 seconds, an audible message will be heard "device is hard resetting." The indicator LED on the front of the camera will flash red and then flash green once the reset is complete. 

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.