How To Record/Review Video (A6-B)
The drone comes equipped with an attached 720p camera which can be used to record during flight. The camera is located on the belly of the drone. To store data retained during flight, the drone also has a built-in microSD card slot which is which is compatible up to 64GB. The microSD card slot is located on the back of the camera. All data retained by the drone will be saved to the microSD card and can be viewed from any mobile device or a computer.
How To Record/Take Snapshots
To take a snapshot or record video while using the drone’s controller, first, turn on the drone and wait at least 30 seconds, giving the camera enough time to sync with the drone. Once the camera has finished syncing to the drone, turn on the controller and pair the drone with the controller. To record video, press and hold the Photo/Video button, located on the top right corner of the drone’s controller for 3 seconds. When video is being recorded, you will hear a beep and the red LEDs on the back of the drone will flash.
To store the recording, you must properly end the recording. If you do not end the recording properly the footage will not be saved to the microSD card. To end a recording, press and hold the Photo/Video button again for 3 seconds. You will hear a beep and the red LEDs will remain solid. Once the recording has been stopped, the footage will be saved to the microSD card and will be available to view.
Similarly, to take a snapshot, press the Photo/Video button once, you will hear a beep indicating a snapshot has been taken and stored onto the microSD card.
How To Review Videos