How To Change a SIM Card (AM-GL300)

How To Change a SIM Card (AM-GL300)

Your GPS tracker will come preinstalled with a SIM card. To change or replace the included SIM card for your Amcrest 2G GPS tracker, please refer to the procedures provided below. 

Note: You can use the included Phillips head screwdriver that came with your device to access the SIM card port on the left side of your device.

Step 1: Locate the SIM card port on the left side of your GPS tracker and unscrew the 2 screws with included screwdriver. 

20190319_114818.jpg

Note: Be careful not to strip the screws and ensure the O rings on the screws are in tact on the screw.

Step 2: Remove the SIM card tray from the side of the GPS to access the SIM card.

20190319_115343.jpg

Step 3: 
Remove the previously installed SIM card from the SIM card tray and place the new SIM card face up into the tray. 

20190319_115014.jpg

Step 4: Insert the SIM card tray with SIM card, facing down, back into the SIM card port on the GPS tracker. 

20190319_115343.jpg

Step 6: 
Using the Phillips head screwdriver and included screws, firmly secure the SIM card tray to the GPS tracker. 

Note: Be careful not to strip the screws and ensure the O rings on the screws are in tact on the screw before securing them to the device.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.