How To Perform A Factory Reset

How To Perform A Factory Reset

factory reset of your device will return your device back to its original factory state. To perform the factory reset procedure, please follow the step by step process highlighted below: 

NOTE: Please verify power is available to the camera while completing the process.

Step 1: Turn the camera upside down to locate the "WPS MicroSD" plate on the bottom of the device.

 

Step 2: Open and remove the plate to locate the reset button for your camera. The reset switch will be located right next to the MicroSD slot. 

cew.png

Step 3: Press and hold the reset down for 45 seconds then release. The device will then begin to factory reset. Once the cameras has completed the factory reset process, you may then log into your camera using its default username and password, which is admin

NOTE: When you are prompted to change your username and password, it is recommended to keep your password to 6-30 characters no special character or symbols. Letters and numbers only and letters are case sensitive.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.