Amcrest View P2P Setup (IP3M-956E)

Amcrest View P2P Setup

Add your camera to other smart phones or tablets by using the P2P setup method if you’ve initially set up the camera on the internet.

Step 1
Connect the camera to a power supply using the included power adapter. Wait 30 seconds for the camera to start-up and initialize.

Step 2
Connect the camera to the internet, either through a wired or WiFi connection. Either by using the App Setup method or Desktop Access Setup method.

Step 3
Open the app. Tab the menu icon   on the top left

Select “Device Manager”.

Next tap the plus icon   on the top right and select the “P2P’ option.

Select the “P2P’ option.

Step 4
Give the camera a name, then tap on the QR code icon   in the “S/N field. Your mobile device is now ready to scan the QR code. In case the QR code cannot be scanned, please enter in the Serial Number (S/N) that is found on the bottom of the camera.


Step 5
Scan the QR code on the bottom of the camera. Once scanned, the username and password fields will populate automatically. If you have already changed your password, or are logging in as another user, please change the username and password fields accordingly.

Step 6
Tap “Next” and wait for the app to connect your phone to the camera. Once connected, tap “Start Live Preview”. If logging in for the first time, you will be prompted to create a new password.

Was this article helpful?
0 out of 0 found this helpful

Can't find what you're looking for?