Push Notification Setup on Amcrest View Pro (iPhone & Android) (720P HD-CVI)

Push Notification Setup

First you need to have the Amcrest View Pro app open and your camera added to the Device Manager.

1. Tap the top left icon to open the menu.

2. Tap the Push Notifications option.

3. Tap Configuration.

4. Select the device you want to receive push notifications from.

5. Now enable push notifications by tapping the switch next to your device.

6. A list of options will be shown:

    • Push Type: This is what will open when you tap on the push notifications you receive, pushing the live view, video or image from the event.
    • Motion Detect: Select if you want to receive notifications from motion being detected.
    • Cam Mask: Select if you want to receive notifications that the camera has been covered or view has been blocked.
    • Face Detection: Not currently available.
    • Local Alarm: Select if you want to be notified that a local alarm has been triggered. (This referring to the I/O alarm ports on the back of the device.)
    • HDD Alarm: Select if you want to receive notifications that no disk is detected, there is low space on the disk, or the disk has an error. 

7. Once you have selected your desired options, tap the Save icon in the top right and you are done!

The most commonly used settings are Push Type: Live and Motion Detect: [camera/channel number]. 

To view a list of all the events that have occurred, under Push Notifications (steps 1 & 2 above), select Event List.

 

Push Notification Interval

Setting the interval for when push notifications appear are show below:

1. Tap the top left icon to open the menu.

2. Tap the Settings option.

    • PTZ Speed: Pan, Tilt, and Zoom speed sensitivity may be adjusted between 1 and 8. This sensitivity will affect the Live Viewing PTZ Controls (1 being slowest, 8 being the fastest.)
    • Snapshot Burst: Image capture at 1 snapshot, 3 snapshots, or 5 snapshots per burst.
    • Push Notification Interval: The time between each push notification you will receive when an event has occurred. (15s, 30s, 1m, 2m, 5m)
    • Replay Duration: The default replay duration showing you 30s segments, from 5s up to 60s intervals may be selected.

3. Select Push Notification Interval and select the preferred interval duration that best meets your application.

Was this article helpful?
0 out of 0 found this helpful

Can't find what you're looking for?